Cab Canopy Boot

Cab Canopy Boot

How to Choose the Right Rubber Boot Seal

You can acquire rubber boot material for your special project. This seal is extruded from hard-wearing EPDM synthetic rubber compound and contains a pliable spring steel clip for fastening to any flange. This material is available by the foot. To find how much you require measure the length around your cab opening. You get several choices of rubber to use for sealing your cabs together.

Quick and Easy Installation

Installing this rubber boot is easy and requires minimal tools. Just snap the seal tightly onto the frame of the window or pass through opening. This provides a tight connection between the two units. Regardless of whether you're adventuring, this seal keeps out rain and ensures a dry space during your journey.

Don't Settle for Less: Upgrade to a Seal Built for the Road

Choosing the right seal is crucial for your vehicle project. This rubber boot stands out due to its premium construction and customer-approved reliability. We take pride on providing products that surpass your demands for long-term satisfaction. Don't settle for inferior seals, upgrade to one that's built to last.

Cab Canopy Boot Features and Benefits

Feature Benefit Use Case
Proven on Sleeper Cab Trucks Successfully used between cab and sleeper on heavy-duty trucks Ideal for semi trucks
Urethane Adhesive Compatible Allows permanent seal when needed for high-stress areas Used in high-vibration or heavy-use applications
Cleanable Surface Easy to wipe down or blow clean for reinstallation Using mild soap and water for cleaning maintenance

Order Form

To begin your order just enter the total amount of feet of boot material you need in the appropriate box next to the item you want to order below. Check your entries then click on the "Order Now " button.

Accordion Boot - Part Number 541

Accordion Boot

The accordion boot is designed for cabs where you take out the truck window. This product works best with fiberglass shells that are 1/8" to 3/16" thick. Please note that both openings must be exactly the same size for this boot to fit properly.

How Accordion Boot Works Animation

$8.95 per foot

In Stock

Order 541

  1. Enter the total amount of feet of boot material you need in the text box
  2. Check your entries, then click on the "Order Now" button.

Compression Boot - Part Number 540

Compression Boot

Use this seal when you leave the rear slider window in the truck. This product works best with fiberglass shells that are 1/8" to 3/16" thick. You will also use this boot if the opening in the fiberglass shell is much larger than the opening in your truck.

How Compression Boot Works Animation

$7.95 per foot

In Stock

Order 540

  1. Enter the total amount of feet of boot material you need in the text box
  2. Check your entries, then click on the "Order Now" button.

Extra Wide Accordion Boot - Part Number 543

Extra Wide Accordion Boot

The extra wide accordion boot is designed applications where you have a large gap between the space you want to seal. This product works best with fiberglass shells or sheet metal flange that are 1/8" to 3/16" thick. Both openings must be exactly the same size for this boot to fit properly.

$11.50 per foot

In Stock

Order 543

  1. Enter the total amount of feet of boot material you need in the text box
  2. Check your entries, then click on the "Order Now" button.

Accordion Boot - Ultra Wide 10" Part Number 544

Accordion Boot 10 inch wide

The Ultra Wide 10 Inch accordion boot is designed for very wide gaps between cabs.. This product works best with fiberglass shells that are 1/8" to 3/16" thick. Please note that both openings must be exactly the same size for this boot to fit properly.

$13.90 per foot

In Stock

Order 544

  1. Enter the total amount of feet of boot material you need in the text box
  2. Check your entries, then click on the "Order Now" button.

Accordion Boot 15 - Part Number 546

Extra Wide Accordion Boot

The Accordion Boot 15 is designed applications where you have a large gap between the space you want to seal. This product works best with fiberglass shells or sheet metal flange that are 1/8" to 3/16" thick. Both openings must be exactly the same size for this boot to fit properly.

$16.50 per foot

In Stock

Order 546

  1. Enter the total amount of feet of boot material you need in the text box
  2. Check your entries, then click on the "Order Now" button.

Compression Bulb Seal - Part Number 545

Compression Bulb Seal

Use this seal when you leave the rear slider window in the truck. This product works best with fiberglass shells that are 1/8" to 3/16" thick. You will also use this boot if the opening in the fiberglass shell is much larger than the opening in your truck.

$8.25 per foot

In Stock

Order 545

  1. Enter the total amount of feet of boot material you need in the text box
  2. Check your entries, then click on the "Order Now" button.

Frequently Asked Questions

  • Does the cab canopy boot allow for movement between the truck and camper?

    Yes, the accordion-style folds are designed to flex, allowing for some movement and vibration without breaking the seal.

  • Is it suitable for sealing between an airbag mounted truck cab and the body hard mounted to chassis rails on a truck?

    As long as there is some sort of flange or wall to install the boot it should work. The thickness of the flange should not exceed 3/16" (4.7625mm) The accordion design allows for independent movement or flex between the cab bodies.

  • Will one of these work on both sliding windows on truck & cap? I don't want to remove either sliding window.

    In order for the boot to attach to the vehicle there must be some sort of thin wall or flange. Keeping the slider window will cover any flange or thin wall. In short you will not be able to use any or the boots if you keep the sliding windows in place as there will be no mechanical method to install the boot.